EN
Horizontal single-axis tracking solar support structure
The difference between a single-axis tracking solar support and a dual-axis tracking solar support lies in that the former can only adjust the elevation angle, while the latter can adjust both the elevation angle and the azimuth angle.
- Overview
- Recommended Products
The difference between a single-axis tracking solar support and a dual-axis tracking solar support lies in that the former can only adjust the elevation angle, while the latter can adjust both the elevation angle and the azimuth angle. Compared with a fixed solar support, a single-axis tracking solar support can increase the power generation by 25%. Although the increase in power generation for a single-axis solar tracking support is lower than that of a dual-axis tracking support, its cost is much lower than that of the dual-axis tracking support. Therefore, many large-scale ground solar power stations choose to use single-axis solar tracking supports.
Failure rate: The solar tracking frame uses electrical components such as motors, hydraulic pistons, and controllers. These components are all from major Chinese brands, significantly reducing the failure rate of the system.
Protection against strong winds and heavy snow: By installing wind sensors and snow accumulation monitoring equipment, when the wind force reaches the set level, the solar panels will automatically be leveled. When the snow accumulation on the solar panels reaches the set value, the solar panels will be automatically tilted vertically.
High tracking accuracy: The solar tracking frames produced by our factory use light sensors or GPS positioning. By obtaining the latitude and longitude of the installation site, the solar tracking frames can automatically control the rotation data.
High flexibility: This single-axis tracking solar frame can be designed in 1 row or 2 rows. According to the size of the site, it can be suitable for choosing the number of solar panels installed on each set of frames.
If you want to customize this tracking solar frame, you need to inform us of the specifications of the solar panels used, the number of solar panels to be installed in one set, the quantity required, the country or region of application, and the application scenario.
| Tracking format | Independent flat single axis tracking system | Tracking angle range | ±60° |
| Driving device | Mechanical transmission, multi-point parallel drive | System voltage | 1000V-1500V/ac380v |
| Control algorithm | Astronomical algorithm+position sensor closed-loop control | Tracking accuracy | 土1° |
| Pile foundation form | Hammer in pile/cast-in-place pile/cement foundation | Power supply mode | Inverter power supply |
| Ambient temperature | -20°C-60°C (-30 °C-60°C optional) | Daily power consumption | 0.04 kWh/day |
| Structural materials | Hot dip galvanized/pre galvanized steel | Component type | Compatible with all components |
| Wind resistant design | The maximum design wind speed reaches 70m/s | Tracker capacity | Up to 100 |
| Reverse tracking | Support intelligent algorithms for terrain adaptation |
