EN
Tilted single-axis tracking solar bracket
The Tilted single-axis tracking solar bracket is similar to the parallel single-axis solar tracking support, but there are differences. The rotation axis of the inclined single-axis tracking solar support is not horizontal but fixed at an angle. The fixed angle is related to the number of installed solar panels; this type of solar tracking support is suitable for application in high-latitude countries and regions.
- Overview
- Recommended Products
The Tilted single-axis tracking solar bracket is similar to the parallel single-axis solar tracking support, but there are differences. The rotation axis of the inclined single-axis tracking solar support is not horizontal but fixed at an angle. The fixed angle is related to the number of installed solar panels; this type of solar tracking support is suitable for application in high-latitude countries and regions.
Low failure rate: All types of solar tracking brackets produced by our factory use electrical components that are jointly developed with well-known domestic manufacturers, significantly reducing the maintenance costs of the tracking photovoltaic brackets.
Targeted application: For how to increase the power generation of solar panels in high-latitude countries and regions, inclined Tilted single-axis tracking solar bracket are an excellent choice.
High compatibility: Regardless of the size of the solar panels used, this tracking photovoltaic bracket can be customized according to the size of the solar panels.
| Tracking format | Single row independent tracking system | Tracking angle range | +60° |
| Driving device | Rotary drive, 28V DC motor | System voltage | 1000V-1500V/ac380v |
| Tracker capacity | Each row can accommodate up to 30 components | Land utilization rate | ≥25% |
| Pile foundation form | Hammer in pile/cast-in-place pile/cement foundation | Power supply mode | Inverter power supply |
| Ambient temperature | -20°C-60°C (-30 °C-60°C optional) | Daily power consumption | 0.02 kWh/day |
| Structural materials | Hot dip galvanized/pre galvanized steel | Component type | Compatible with all components |
| Wind resistant design | 105mph (47m/s) (ASCE7-10), can be designed according to the wind speed of the project site | ||
